All "P" Settings ExplainedUpdated a day ago

The Water Chiller 2.0 has several configurable “P” settings that allow you to fine-tune its operation. Here’s what each one does:

P1 – Temperature Tolerance Range

• Range: 0.1–18.0°F

• Default: 3.6°F

• Controls how much the water temperature is allowed to rise above your target before the compressor turns back on. Lower values = tighter control, higher values = larger temperature swings.

P2 – Compressor Delay Startup Time

• Range: 1–5 minutes

• Default: 3 minutes

• Determines how long the compressor waits before turning on again after reaching the target temperature. Helps prevent short cycling and protects the compressor. This setting is preset at the factory and should only be adjusted if instructed by our team.

P3 – Temperature Correction (Calibration Offset)

• Range: -3.6–3.6°F

• Default: 0.0°F

• Adjusts the displayed temperature to match a separate thermometer if there is a consistent difference. Only change this if instructed by our team. 

P4 – Temperature Name (°C/°F)

• Options: °C or °F

• Default: °C

• Switches the display between Celsius and Fahrenheit.

P5 – WiFi Reset

• Options: OFF (no action) or ON (reset)

• Default: OFF

• Resets the WiFi connection when set to ON.

These settings allow you to customize the Chiller 2.0 for more precise temperature control, improved efficiency, and easier integration with your setup.