Water Chiller 2.0 Troubleshooting
Any issues with your water chiller 2.0? Here's all the solutions to common problems.
P1 & P3 settings explained (temperature sensor control)
If you ever want to adjust how tightly your Water Chiller 2.0 controls temperature, how quickly the compressor turns on or you’re noticing a larger temperature swing than expected, you can check the P1, P2, and P3 settings on the digital controller.
All "P" Settings Explained
The Water Chiller 2.0 has several configurable “P” settings that allow you to fine-tune its operation. Here’s what each one does:. P1 – Temperature Tolerance Range. Range: 0.1–18.0°F. Default: 3.6°F. Controls how much the water temperature is allowed
How to Solve Air in the System
If you’re experiencing slow or irregular water flow, loud or straining noises, frequent filter cycling, or a low water level in the filter housing, this is typically caused by air entering the system or restricted water flow, not a system defect. Ple
Error Codes Explained
If your Water Chiller 2.0 display shows an error code, it means the system has detected an issue that needs attention. Below is what each error code means and the recommended next steps. What it means:The system is not receiving a proper reading from
Why is my chiller leaking?
If your chiller connections are leaking, don’t worry, this is usually a quick and simple fix! The system is designed to be 100% leak-free, so almost every leak we see is related to setup, usually involving missing gaskets or improperly sealed connect