How do I set the temperature on the display?Updated 6 months ago
To set the temperature of the chiller simply follow the instructions below:
- Ensure that the water chiller is plugged in and water is flowing through the machine.
- Press the SET button once.
- Adjust the temperature up or down using the arrow buttons.
- Press the RST button once (do not hold it down).
- Your chiller will begin cooling down to the set temperature. You should hear the chiller's compressor start after 1-5 minutes. Please allow 30-60 minutes for the temperature to start dropping, as the chiller requires some time to activate its compressor.
If you experience any issues with the temperature after setting it, please adjust the settings as shown in this link: How to set the F1 and F2 settings.
You can also take a look at the Chiller Setup Guide!
Need further assistance? feel free to reach out to [email protected]!